XIP-3901-ASI
High-density ASI/IP Gateway Application for XIP-3911 and XIP-3901
The XIP-3901-ASI application facilitates cable, satellite and IPTV operators’ migration towards IP infrastructures by offering a flexible, highly integrated DVB-ASI/ IP bidirectional gateway that can bridge any type of MPEG transport stream to/from IP networks. The high density allows 192 (96 ASI->IP and 96 IP->ASI) gateways per 4 RU Densité 3+ FR4 frame, saving substantial rack space in high channel count environments. Its scalability through modularity is the ideal solution to address increasing TV channel lineups.
The dual Ethernet SFP sockets allow fiber or electrical connectivity to the main and backup video backbone to provide complete redundancy of MPEG transport streams...
FEATURES
- Very high density with 16 gateways per card/192 gateways per 4 RU Densite 3+ FR4 frame
- Support up to 8 DVB-ASI inputs and 8 DVB-ASI outputs
- Handle most demanding streams:
- Up to 213 Mb/s per DVB-ASI
- Total of 1.7 Gb/s maximum on 10/25 GbE Ethernet device
- Convert legacy ASI devices to IP and IP to ASI conversions
- Ability to pair DVB-ASI I/O as main and backup with automatic change-over switch
- Flexible IP connectivity through two distinct SFP ports for optical or electrical modules:
- 10 GbE AOC and Optical SFP
- 25 GbE AOC and Optical SFP
- Both FEC74 (CL74 Fire Code) and FEC108 (Reed Solomon IEEE) Forward Error Correction are supported on 25 GbE interfaces
- SMPTE ST 2022-7 Class A seamless protection switching of IP streams
- SMPTE ST 2022-1 FEC for real-time video/audio transport over IP networks on the transmit side only
- SMPTE ST 2022-2 unidirectional transport of constant bit rate MPEG-2 Transport Streams over IP networks
- SMPTE ST 2022-3 unidirectional transport of variable bit rate MPEG-2 Transport Streams on IP networks
- UDP/RTP encapsulation 1 to 7 TS/IP packet
- Support of multicast traffic control using IGMPv3 MSM/SSM
- Network jitter removal
- NMOS IS-04 discovery and registration (limited supported in AMWA)
- NMOS IS-05 device connection management (limited supported in AMWA)
- Support for DHCP, LLDP and DNS-SD for easy IP configuration
- In-band or out-of-band control of NMOS, web interface and Rest API
- Dynamic endpoint control (multicast join/leave) and monitoring by GV Orbit
- Complete integration with GV Orbit for configuration, control, monitoring and routing
- HTML5 web-based configuration interface
- Open configuration management & monitoring with the Rest API
- Individual XIP-3911 and XIP-3901 applications licensed, purchased as needed
- Rapid switching between XIP-3911 applications
SPECIFICATIONS
ASI (Inputs/Outputs)
Physical: 16 HD-BNC connectors configured as 8 inputs and 8 outputs
Standards: EN50083-9 (V2:3/98) DVB ASI
Cable length (Belden 1694A): 300m (984 ft.) Belden 1694A at 270 Mb/s
Data bit rate: Each I/O up to 213 Mb/s
TS packet size: 188/204 bytes
Return loss: >15 dB up to 270 MHz
Output jitter: <0.2 UI (0.74 ns) pp
Ethernet Ports for Media
Physical: Two SFP+ sockets for active optical cable, short- and long-reach fiber
Standard: IEEE 802.3-2008 for 10 GbE and 25 GbE
Performance: Up to 1.7 Gb/s of streaming per direction depending on the physical interface
Transport: SMPTE ST 2022-2/3 IP Unicast or Multicast with IGMPv3 & SMPTE ST 2022-7 Class A
Ethernet Ports for Control
Physical: One electrical RJ45 port
Standard: IEEE 802.3 1000 Mb/s
Electrical
Power: 60W maximum
MEDIA GALLERY
ORDERING INFORMATION
Application Software
XIP-3901-ASI
High Density ASI/IP Gateway application
Densite 3+ Frame
XIP-3911
Agile SDI/IP processing platform
XIP-3911-3+DRP-H
Double rear panel for Densité 3+ with HD-BNC
SFP+ Options (one or two SFP are needed to run this application)
SFP-ETH10G-RT-S13-LC
Optical 10 GigE cartridge, single-mode 1310 nm, LC/PC connector, 10 km
SFP-ETH10G-RT-M85-LC
Optical 10 GigE cartridge, multimode 850 nm, LC/PC connector, 300m
SFP-25G-SR
SFP28 25GBASE optical transceiver MMF
SFP-25G-LR
SFP28 25GBASE optical transceiver SMF
